Infla10® Inflatable Penile Prosthesis | Rigid Erection & Natural Flaccidity
Infla10<sup>®</sup> Inflatable Penile Prostheses

Infla10®

Inflatable Penile Prostheses
Infla10<sup>®</sup> Inflatable Penile Prostheses

Infla10®

Inflatable Penile Prostheses
  • Rigicon offers the Infla10® three-piece inflatable penile prostheses for men who need surgical intervention to treat erectile dysfunction (ED). Infla10®  is indicated for patients suffering from chronic, organic ED (impotence) and suitable candidates for penile prosthesis implantation.

  • Infla10® Anatomical eXpansion (AX) model, in addition to conventional girth expansion,  offers length expansion too. Infla10® is currently the only inflatable penile prosthesis on the market that can offer length expansion with hydrophilic coated cylinders. Length expansion cylinders have the potential to help you benefit from your penile anatomy in its full capacity. Inflatable penile prostheses act as a “tissue expander,” and Infla10® AX will compensate for the additional length that may be gained after implantation. Additionally, AX cylinders have the potential to minimize the risk of “Concorde Defect” that may occur with undersized cylinders or no-length expansion cylinders. Consult your specialized physician to understand if you are a suitable candidate for an AX cylinder implantation.

  • Infla10® NarrowBody™ model is specifically designed for patients with smaller or compromised anatomies. NarrowBody™ cylinder diameter is smaller than X and AX cylinders, enabling patients with compromised/fibrotic erectile chambers (corpora cavernosa) to receive an inflatable penile prosthesis still.

INFLA10® X

Inflate & Deflate Instructions

INFLA10® AX

Inflate & Deflate Instructions

Girth Expansion

Girth Expansion Cylinders

Infla10® X cylinders offer girth expansion, providing satisfactory axial rigidity while providing natural flaccidity. 

Length Expansion

Girth & Length Expansion Cylinders

Infla10® AX cylinders offer anatomical girth and length expansion, addressing concerns regarding post-operative penile shortening. 

HydroShield™ Coating

NarrowBody™
Cylinders

Infla10® NarrowBody™ cylinders are offered for compromised or smaller anatomies. 

Girth Expansion

Proprietary 4th Layer

Infla10® cylinders are reinforced with a novel 4th layer which increases cylinder surface integrity, offering a potential solution to cylinder surface erosion, one of the main causes for device malfunction.

Length Expansion

Anatomic Tip Design

Infla10® cylinder distal tip is designed to rest comfortably under the mid-glans penis.

Infla10® At A Glance

Infla10 At a Glance
Soft-to touch tips

Girth & Length Expansion Cylinders

Infla10® AX cylinders offer anatomical girth and length expansion, addressing concerns regarding post-operative penile shortening.  

Rigidity

HydroShield™ Coating

Infla10® incorporates a hydrophilic coating on all external surfaces, including the tubing, connector, and rear tip extenders, which may promote easier device implantation.   

Proprietary 4<sup>th</sup> Layer

Proprietary 4th Layer

Infla10® cylinders are reinforced with a novel 4th layer which increases cylinder surface integrity, offering a potential solution to cylinder surface erosion, one of the main causes for device malfunction.  

Anatomic Tip Design

Anatomic Tip Design

Infla10® cylinder distal tip is designed to rest comfortably under the mid-glans penis.  

Rapid-Pump™

RapidPump™

Rigicon’s innovative pump mechanism offers greater ease and speed when inflating and deflating the prosthesis. This very soft pump is easy to locate and manipulate with less effort.

AdaptiveReservoir™

AdaptiveReservoir™

The reservoir will easily take the shape of the implantation site. The lock-out valve on the reservoir will minimize the risk of involuntary inflation.
Easy-Click™ Connectors

EasyClick™ Connectors

Kink-resistant tubes are connected easily and manually without the need for any additional assembly tools.
ConnectSecure™ Extenders

ConnectSecure™ Extenders

ConnectSecure™ Rear Tip Extenders provide a secure and rigid connection.

  • Soft-to touch tips

    Girth & Length Expansion Cylinders

    Infla10® AX cylinders offer anatomical girth and length expansion, addressing concerns regarding post-operative penile shortening.  

  • Rigidity

    HydroShield™ Coating

    Infla10® incorporates a hydrophilic coating on all external surfaces, including the tubing, connector, and rear tip extenders, which may promote easier device implantation.   

  • Proprietary 4<sup>th</sup> Layer

    Proprietary 4th Layer

    Infla10® cylinders are reinforced with a novel 4th layer which increases cylinder surface integrity, offering a potential solution to cylinder surface erosion, one of the main causes for device malfunction.  

  • Anatomic Tip Design

    Anatomic Tip Design

    Infla10® cylinder distal tip is designed to rest comfortably under the mid-glans penis.  

  • Rapid-Pump™

    RapidPump™

    Rigicon’s innovative pump mechanism offers greater ease and speed when inflating and deflating the prosthesis. This very soft pump is easy to locate and manipulate with less effort.

  • AdaptiveReservoir™

    AdaptiveReservoir™

    The reservoir will easily take the shape of the implantation site. The lock-out valve on the reservoir will minimize the risk of involuntary inflation.
  • Easy-Click™ Connectors

    EasyClick™ Connectors

    Kink-resistant tubes are connected easily and manually without the need for any additional assembly tools.
  • ConnectSecure™ Extenders

    ConnectSecure™ Extenders

    ConnectSecure™ Rear Tip Extenders provide a secure and rigid connection.

  • AdaptiveReservoir™
  • Proprietary 4th Layer
  • Anatomic Tip Design
  • Girth & Length Expansion Cylinders

    Infla10® AX cylinders offer anatomical girth and length expansion, addressing concerns regarding post-operative penile shortening.
  • HydroShield™ Coating

    Infla10® incorporates a hydrophilic coating on all external surfaces, including the tubing, connector, and rear tip extenders, which may promote easier device implantation.  
  • RapidPump™

    Rigicon’s innovative pump mechanism offers greater ease and speed when inflating and deflating the prosthesis. This very soft pump is easy to locate and manipulate with less effort.
  • AdaptiveReservoir™

    The reservoir will easily take the shape of the implantation site. The lock-out valve on the reservoir will minimize the risk of involuntary inflation.
  • EasyClick™ Connectors

    Kink-resistant tubes are connected easily and manually without the need for any additional assembly tools.
  • ConnectSecure™ Extenders

    ConnectSecure™ Rear Tip Extenders provide a secure and rigid connection.
  • Proprietary 4th Layer

    Infla10® cylinders are reinforced with a novel 4th layer which increases cylinder surface integrity, offering a potential solution to cylinder surface erosion, one of the main causes for device malfunction.
  • Anatomic Tip Design

    Infla10® cylinder distal tip is designed to rest comfortably under the mid-glans penis.
RapidPump™

RapidPump™

Rigicon’s innovative pump mechanism offers greater ease and speed when inflating and deflating the prosthesis. This very soft pump is easy to locate and manipulate with less effort. 

AdaptiveReservoir™

AdaptiveReservoir™

The reservoir will easily take the shape of the implantation site. The lock-out valve on the reservoir will minimize the risk of involuntary inflation.

EasyClick™ Connectors

EasyClick™ Connectors

Kink-resistant tubes are connected easily and manually without the need for any additional assembly tools. 

HydroShield™ Coating

HydroShield™ Coating

Infla10® incorporates a hydrophilic coating on all external surfaces, including the tubing, connector, and rear tip extenders, which may promote easier device implantation. 

SecureFit™ Extenders

ConnectSecure™ RTE

ConnectSecure™ Rear Tip Extenders provide a secure and rigid connection.

INFLA10® X

Slide the bar to see inflated and deflated states

INFLA10® AX

Slide the bar to see inflated and deflated states


References

1 Rigicon® Infla10® three-piece penile prosthesis Instructions for Use.

All product names, logos, and brands are property of their respective owners.

©2020 Rigicon, Inc. All rights reserved. RIGI-13-01.2021